For as long as we’ve built the Viking, one question has come in more than any other — by phone, by email, at every event: can I just buy the tub? Most of the people asking already have a cooling setup: a chiller from a previous tub, a facility with its own equipment, a long-standing ice routine, or a home in a cold climate where cold water is easy to come by. What they want is a better tub to put it in. Until now, the answer was no. Starting today, the Viking Hybrid, Viking Premier, and Viking XL are all available as tub-only units: a premium cold plunge tub without a chiller. They have the same rotomolded shell, insulation, and finish as the full systems, with no chiller included.
If you don’t already have a way to cool your water, the complete Viking Cold Plunge is still the one we recommend. This guide explains who the tub-only version is for, and who is better served by the full system.
Can You Buy a Cold Plunge Tub Without a Chiller?
Yes. Nordic Wave now sells the Viking Hybrid, Viking Premier, and Viking XL as standalone, tub-only cold plunges — no chiller included. They’re built for plungers who already have a way to cool their water: a chiller they already own (connected at their own risk), an ice routine, or a climate cold enough to do the work. For daily cold at a set temperature with no ice runs, the full Viking system with its integrated chiller remains our recommendation.
Tub-Only Viking: Key Facts
What Comes With a Tub-Only Viking?
A tub-only Viking is the same tub that ships with our full systems, with the same build, insulation, and finish. The only difference is that the chiller isn’t included.
Why Does a Tub-Only Cold Plunge Cost $3,490?
A fair question. Without a chiller, it’s reasonable to expect a tub to be inexpensive. Most low-cost cold plunges are inflatable PVC, thin-wall plastic, or a converted stock tank: products designed to ship in a small box and be replaced in a season or two. The Viking is built the opposite way. The price reflects how it’s made, what it’s made from, and what it takes to get it to your door.
Every Viking tub is rotomolded, the same manufacturing process used for YETI coolers, whitewater kayaks, and marine equipment. It forms a single, seamless piece of polyethylene with no joints to split, no seams to leak, and no air chambers to puncture.
Rotational molding is slower and more exacting than the injection molding or blow molding used for most plastic products. That’s the point.
Each cycle produces one tub, and it takes time. It’s a manufacturing method chosen for strength, not speed.
What That Means in Your BackyardA Viking doesn’t fold, deflate, or fit in a parcel box. It ships as a full-size, fully formed rigid tub that has to arrive without a scratch. That means freight shipping, protective crating, and handling built for an oversized item: costs that are already built into the price rather than added at checkout. Shipping is free on every tub-only Viking.
When you compare a $3,490 Viking with a sub-$1,000 inflatable, you’re comparing a piece of equipment with a seasonal product. The Viking is designed to be the last tub you buy.
Who Is a Tub-Only Cold Plunge For?
A tub-only Viking is a specific tool for a specific buyer. It makes sense in four situations.
If none of those describe you, or you want the complete experience with cooling, heating, and multi-stage sanitation built in, shop the full Viking Cold Plunge system.
Jump to a Tub
Tub-Only Viking Comparison
| Model | Capacity | Entry | Included | Best For |
|---|---|---|---|---|
| Viking Hybrid | 101 gal | Step-in | Lid | Easiest entry |
| Viking Premier | 95 gal | Step over, with steps | Lid + steps | Small spaces |
| Viking XL | 160 gal | Step over, with steps | Lid + steps | Taller users, shared use |
Chiller not included with tub-only units. Every model is also available as a complete system with an integrated chiller.
1. Best Tub-Only Plunge for Easy Entry
The Hybrid is built around step-in access, which removes the biggest physical hurdle in vertical plunging: climbing over the wall. As a tub-only unit, it’s the most approachable way to own a Viking — the same rotomolded construction and insulated walls, ready for ice or the chiller you already have.
Want it cold every day without ice? See the complete Viking Hybrid with chiller.
2. Most Comfortable Tub-Only Plunge
The Premier is our best-known tub for a reason: full shoulder-deep submersion in a 36" × 30" footprint that fits a patio corner, garage, or primary bathroom. The vertical posture makes it easier to control your breathing, and the sloped floor with a garden-hose drain valve keeps water changes simple — which matters more when you’re working with ice.
What Reviewers SayWant it cold every day without ice? See the complete Viking Premier with chiller.
3. Most Spacious Tub-Only Plunge
The XL was named Best Vertical Cold Plunge in Fortune’s 2026 cold plunge guide. It keeps the upright design but adds significantly more interior room — the right call for taller or broader plungers, or households where several people share one tub.
Want it cold every day without ice? See the complete Viking XL with chiller.
How Much Ice Does a Tub-Only Cold Plunge Need?
As a starting point, 1 pound of ice lowers about 20 gallons of water by 1°F. The table below shows approximate amounts based on the physics of melting ice, assuming starting tap water around 70°F. Real-world needs run higher in hot weather or direct sun, and lower once the water is already cool — this is where 2" insulated walls and a sealed lid earn their keep.
| Model | Water Volume | 70°F → 50°F | 70°F → 40°F |
|---|---|---|---|
| Viking Hybrid | 101 gal | ~105 lbs ice | ~165 lbs ice |
| Viking Premier | 95 gal | ~100 lbs ice | ~155 lbs ice |
| Viking XL | 160 gal | ~165 lbs ice | ~265 lbs ice |
Estimates based on ice’s latent heat of fusion with no outside heat gain. Colder starting water means less ice.
For an occasional plunge, that’s manageable. For a daily practice, it means 100 to 265 pounds of ice each time the water warms back up. The integrated chiller in the full system removes that step: the water holds at your set temperature, down to 35°F, every morning.
Why Most Daily Plungers Choose the Full System
The tub is half of the experience. The other half is cold water that’s ready whenever you are. The complete Viking system adds:
When the tub, chiller, and support all come from one company, there’s no question about who to call. With a third-party chiller, compatibility, maintenance, and repairs are on you. For more on what the chiller does, read Cold Plunge Chiller: What It Is, How It Works, and Why It Matters.
Should You Buy the Tub Only or the Full System?
Frequently Asked Questions
Can I buy a Viking cold plunge without the chiller?
Yes. The Viking Hybrid, Viking Premier, and Viking XL are all available as tub-only units with no chiller included. The Premier and XL include a lid and steps; the Hybrid includes a lid.
What is the best vertical cold plunge tub without a chiller?
Nordic Wave’s tub-only Vikings cover three needs. The Viking Hybrid (101 gallons) offers the easiest step-in entry. The Viking Premier (95 gallons) is the most space-efficient. The Viking XL (160 gallons) gives taller users and shared households the most room. All three are rotomolded with 2" foam-insulated walls.
Why is a cold plunge tub without a chiller still expensive?
The Viking is rotomolded, the same process used for YETI coolers. It produces a single, seamless polyethylene shell with 2" of foam insulation, finished by hand. It’s rigid, durable, and built for years of indoor and outdoor use. It also ships by freight as a full-size rigid tub, unlike inflatable plunges that pack into a small box.
Do I need a chiller for a cold plunge if I live in a cold climate?
Not always. In colder regions, winter tap water and outdoor air can bring an insulated tub like the Viking to plunge temperature without a chiller. In warmer months, or for a set temperature year-round, a chiller or ice will still be needed.
Should I buy a tub-only Viking or the full system?
If you don’t already own a chiller, choose the full system. It holds water as cold as 35°F every day without ice, heats to 104°F, and runs continuous UV sanitation and filtration, so you change the water about once a month instead of every few days. It’s supported by one team. The tub-only version is for buyers who already have their own cooling.
How long will ice keep a tub-only Viking cold?
It depends on starting water temperature, air temperature, and sun exposure. The 2" insulated walls and lid slow warming significantly compared with an uninsulated barrel or stock tank, so keep the lid on between sessions.
Can a tub-only Viking be used outdoors?
Yes. The rotomolded shell is built for indoor and outdoor use. If water may freeze, drain the tub or keep it covered and monitored.
How often should I change the water in a tub-only cold plunge?
Without integrated filtration and sanitation, plan on changing the water much more often: every few days with regular use, and immediately if it looks cloudy or smells off. The sloped floor and garden-hose drain valve make draining straightforward.
You Might Also Like
Find the Right Viking
Already have your cooling handled? The Hybrid, Premier, and XL are now available tub-only. Starting fresh? The complete system is ready to plunge on day one.
Shop Complete Viking Systems

Share: